My prints up to this point have been okay, but not great. Serious stringing seems to be an issue here, and one of the things I’ve notice is that the further along the print goes, the more it seems like the print head is almost grinding into the print. To the point where if I’m printing something like a minifigure, it will get ripped apart mid print. Am I overextruding? Missing z steps?
Filament is Overture PETG, Nozzle is 230C and bed is 80C. I have it in an enclosure. I’m running it from a laptop set up with Cura.
Hoo boy I had it going way too fast. I had it moving at 150mm/s. I very strongly suspect this is about 90% of my problem. Layer quality already seems vastly improved a few layers in at 50mm/s. I very much appreciate the insight!