Been using tp-link smart plugs for a moment. Not really had any problems with them but i want to move to something such as z-wave or a ZigBee. Something that is totally local and does not require a different app on my phone.

  • Avid Amoeba@lemmy.ca
    link
    fedilink
    English
    arrow-up
    2
    ·
    edit-2
    11 days ago

    Yeah. I buy plenty from Ali but I generally avoid power grid electric devices. Flaws in those are much more likely to result in home fires than some low-power electronic device that doesn’t plug into the wall. If you need cheap smart plugs, I’d get something sold locally, certified in your country / EU. IKEA’s plugs should be cheap. Either way, every legitimate power plug I’ve seen either has a disclaimer written somewhere that prohibits inductive load use or it’s got a secondary, lower wattage rating for those. Or it says it handles inductive loads at the standard current.

    With all that said, if you’re educated enough in electricity, you could crack one open and inspect it yourself for safety. It’s entirely possible they’re using the expensive relays. 😄

    E: I tried checking my own homework just now and I can’t find Hue or IKEA saying anything about inductive loads on their websites anymore. I feel like I’m going crazy. I swear I’ve seen it written on IKEA plug and on their website. Maybe the all updated their stuff to use better relays? I don’t know. Either way your espresso machine is a resistive load so it doesn’t fall in the sparky category.

    • shortwavesurfer@lemmy.zip
      link
      fedilink
      English
      arrow-up
      2
      ·
      11 days ago

      Out of curiosity, what does failure of one of these things look like? I’ve got one that’s running my window air conditioning unit. It draws about 600 watts while it’s running, but when it very first starts up, it pulls about 1700 watts instantaneously and then immediately drops.

      That is still within the 15 amps the plug is rated for with a margin of about 100 watts.

      • Avid Amoeba@lemmy.ca
        link
        fedilink
        English
        arrow-up
        1
        ·
        11 days ago

        As far as I know the switch stops connecting or disconnecting. But besidss that I don’t know what the failure mode of a worn relay looks like. E.g. whether it could overheat and melt due to a poor connection because of worn contacts. You should read more on that.

        • shortwavesurfer@lemmy.zip
          link
          fedilink
          English
          arrow-up
          2
          ·
          11 days ago

          Okay, that’s good to know. If it’s just that the switch doesn’t disconnect or connect, that’s fine, because even if it fails in a connected state, the air conditioner itself only pulls about 5 amps while running, and the plug itself is rated for 15 amps.

          It only pulls anywhere close to that when it’s very first starting up and only for a brief moment.

    • nowherebutup@feddit.org
      link
      fedilink
      English
      arrow-up
      2
      ·
      edit-2
      10 days ago

      thank you very much for your reply! They worked fine for 2 years now, I hope they wont fatally fail. In the future I will switch to known brands :)