Built when Netflix first took away password sharing. Thanks for the heads up Netflix! Would not want to start this project now 😂
Edit: adding temp and specs
I9 11900k Z590I Vision D ITX mobo 64gb memory The 16x lane is bifurcated to run: Intel a310 & Lsi 9305 16e into a hp dl380
Drives are 10x 14 tb wdd in raidz1, 6 256gb sata ssds in a pair of 3 wide mirrors for special vdev metadata, a 512gb nvme for read cache, and a 64gb optane for slog
Are the spinning disks for Linux ISOs? If so, why raidz1 instead if snapraid?
Was just what I was experimenting with when I built it a few years ago. Never gave may issues so I’ve just stayed with it. Would be nice to be able to mismatch my drive size though
Makes sense. Might as well wait for the zfs anyraid coming out “soon”
Two of the drives are 18tb I got cheap 😂 so maybe in a decade I’ll get that 8tb of space
Raid z1 with 10 14tb disks? That’s a bold move cotton, let’s see how it plays out.
Yea, I definitely would have gone z2, but this all started with the drives, and slowly expanded into this monster. But so far it’s been running smooth. The drives were added at different times to so they shouldn’t fail at the same time (hopefully 😂)
Here’s mine : )
Oooo, cute mini system! I’ve always wanted to start a cluster with tiny towers like that
Looks like with the doors closed its going to be smokin.
The one fan in the left will do the trick
Plus the other fan hiding behind the system 😉 posted temps in a comment of you eye curious
i love the toxic kiddies on selfhost these days “its too hot the fans wrong” op explains and gets downvoted. whats the saying?, “not my circus not my monkeys”. if this is the energy your going to bring to this community go back to reddit and be a toxic pos there.
I mean… Look at the setup, though.
Nobody is trying to be mean, it’s just a pretty rough setup where thermals are concerned. And OP appears to be dismissing every joke about it and claiming it’s not an issue.
Good luck, OP. Hope this is the hottest your place ever gets, in which case you might be alright. Just keep an eye on those temps since servers need to run very cool to avoid long term damage and wear and tear. Be extra cautious of your large array of HDD’s. Those can get hot and people don’t always think about that.
Edit: OP mentioned lower in the thread that they are pulling 300-350 watts from the wall. That is a lot of heat. Maybe they live in Alaska and keep their place at 55 degrees, though. We don’t know… But for those looking on and considering their own setup, a lot of red flags are here for those who have higher temps in their homes.
I keep my place at 74, and basically have a per room heat pump to never have the temp be an issue even on a 108 day. I’ve been running the setup for over two years now and have monitored thermals the whole time and have never had an issue. I understand the concern, and had the same concerns at first too, but the results don’t lie. It’s just very well tuned for it’s environment
I’m choosing to focus on the positive comments, and giving info to those who doubt. In the end I know there’s a few people at least who saw this and got some inspiration for a fun project
You are a bigger person than I <3 what youre doing is a great solution to noise in a living space and if you have no thermal throttling its designed exactly for what its intended for. Thanks for sharing you have given me some ideas for managing my own noise issues regarding homelabbing.
I just think no one’s really coming at it in a way they think it’s rude, and most had been out of concern, just worded rough. I definitely can be rough with my words sometime so I can’t be too mad. Also thanks for engaging ❤️ love you and all the lurkers following along
lolz that’s wayyyy too much emotional maturity for the internet. we need more of it :)
For those worried about temps. The cpu never goes past the 80s when being ran hard, and drive temps are comfortably in the 40s
A little bit of airflow can make a huge difference. If it works it works. I think the doubters have just never experimented.
You left in your IP no0b! Now I’m gonna pwn your server with my super hacker skillz xoxoxoxo
P.S. That’s is one hell of a setup! I am surprised how well ventilated it is
I just sent a ddos attack to his ip. In an unrelated event my doorbell camera has stopped working?
Oh, and if anyone is curious on specs. This is my old gaming rig but it’s: I9 11900k Z590I Vision D ITX mobo 64gb memory The 16x lane is bifurcated to run: Intel a310 & Lsi 9305 16e into a hp dl380
Bet it’s quiet as fuck tho
Super quiet, and had been running non stop for over a year no with no problems 😊 also that i9 runs super hot. When it was in my lil gaming rig it was always running up near 90. So retiring to the server had been much more gentle on it, lol
Always in 90s? Did you remember the thermal paste on reinstall? Lol
It just had a very undersized cooler at the time (pics of case are hiding here somewhere lol). It would idle normally, but load put it near throttle. Moved to the 9800x3d though in the same case and that performs like a dream
Seems cozy
Ever just throw a hot pocket in there for a couple minutes?
Lol, it’s warm. Though thanks to the intake and exhaust built into the cabinet the temps are great. I added what they currently are while it’s rencoding by library.
Not sure if stroke or just above my head.
I think “tennis” was supposed to be “temps” but got autocorrected.
This post here. I fixed it on most replies, but SwiftKey did not like me using the word temp
thanks for sharing, nicely done, would love a video or dB reading. noise wise, my rack doesn’t get too bad running mini-itx boards and quadro p2200s; my gaming rig, on the other hand, could benefit from this. SFF case with a deshrouded rx 6650 xt and 80mm server fans from arctic (max 8000rpm). it sounds like a jet engine spinning up when i play anything, despite the 3000rpm limit i put in fan control.
aside, would you mind sharing your av1 settings? i currently pass everything through ffmpeg to mkv in an attempt to save space with my plex library
Here’s my tdarr flow. I have redundent paths to handle if qsv fails and to retry in software if you’re curious of why it splits
Also, here’s my lil gaming rig too. Runs warm, but it’s tiny.
It’s a 9800x3d paired with a 6800xt
I just built a new rig and was soooo close to going mITX, but I just didn’t want to deal with the cramped build space. And the selection of MoBo’s was abysmal compared to ATX and mATX.
I still always get a bit jelly when I see people do it, as they are clean AF. Good on you!
And as others have said: you’re taking the criticism on the chin like a champ. It’s fun to experiment with weird things and you found something that works for you. That’s all that matters.
Enjoy the weekend!
It’s alot of fun. NSFW makes some really easy to build in ITX cases if you ever want to dabble. My req though is too put a baffle made of stuff foam to force cool air in for the gpu. I’ll post a Pic of my main setup when I get home later this week if you want
There are two fans built into the cabinet. Temps stay nice and cool
I don’t get this setup. First you install a lot of sound proofing, then you install one fan that has to run near light speed to keep that computer cool.
I have an intake on the bottom pulling cold air, and the top is for exhaust. Both are 3000 rpm fans and together keep the tennis real low. I added the current tennis in a comment while it’s running full tilt
Is there high tennis?
Lol. I mistyped tennis so many times 😂
What’s your electric bill look like each month?
Surprisingly the server is pretty good on pretty usage. It pulls about 300-350w from the wall, so probably about $50 a month. For being my security system and media server is pretty cost effective
WHOA, that is a lot of energy. What CPU are you using? That thing must run HOT.
I’ve got a new setup (runs what you’re running and a few others) that takes in 60 watts. I live in SoCal, though, so our rates are insane. For me 350 watts would run me $125 a month. It’s so bad here…
I9 11900k and about 18 spereate sata drives. The lil amounts add up 😂
Bruh your gonna need a blower so loud it totally obliterates that sound protection.
The whole setup is really quiet actually! The cabinet has an intake fan hiding on the bottom, while the top fan is just exhaust. Then all the fans in the system are built for front to top exhaust. I posted temps while the system is running full tilt of you were curious
Had to check if this was the memes category.
Posted temps and specs if you were curious 😉 guessing you didn’t think I had more fans in the cabinet
Neat, an Intel GPU.
Thanks! For plex and frigate it’s been awesome. Also running tdarr to rencode everything to Av1 at 8mbs or less
Yeah man, that’s the perfect choice. I use a very similar card myself. They outperform gaming GPU’s for this purpose!